The Adel Systems series of DC-UPS with MODBUS interface allow the operator to monitor and configure devices remotely. The Modbus RTU RS485 protocol can be integrated into SCADA and communication systems without any limitations. The line of DC-UPS with MODBUS RTU RS485 interface consists of the following models: CBI2501224A, CBI2801224A, CBI1235A, CBI2420A and CBI4810A.
The MODBUS RTU RS485 connection can be used to connect CBI to the Adelviewsystem software for configuring them. The Adelviewsystem software can be downloaded free of charge from the web and requires no license on a PC.
The MODBUS RTU RS485 Adel System map consists of more than 100 parameters, divided into different operations:
Monitoring;
History;
Configuration;
Alarming;
Data Logging.
Main Features
Output voltage 12, 24, 48Vdc, even in the absence of power supply
Output current 2.5A ÷ 25A, even in the absence of AC mains
Fault signaling via relay contact, blink code, and Modbus RTU and TCP/IP protocols
Automated power sharing of available power between load and battery charging
Output power: 250W, 280W, 500W, 600W
Power boost, up to 3 times the rated current available. Ability to handle high current surges
DC-UPS and battery self-diagnosis: high voltage; sulfated battery; reverse connection; possible shorted element; short circuit protection
"Main or back-up" and "battery failure/discharge" signaling relays with galvanically isolated output contacts
Accessories: battery temperature sensor, external display, PC and Modbus connection cables
.svg){kind=small}
