|
|
TRANS-MidiAMF
Automatic mains failure units
The unit provides for automatic transfer of a load from mains to generator in the event of a mains failure. Intended for unattended operation, it is able to detect failure of any phase of the mains and to start and switch over to a generator if the mains voltage goes outside pre-set limits. Both automatic and manual control are possible. A test mode is also available which allows the generator to be run without taking the load.
 |
- Log last 50 events & alarm information wiht measured values
- Statistics records
- Mains & Generator phase sequence control
- Selectable Resistive sender types; Pt-100 VDO, US, GM, Ford, Datcon, etc...
- CanBus J1939 ECU communication
- SPN, FMI and OC values reading from engines via J1939
- Remote Start/Stop Speed and Idle mode Control via J1939
- Local Remote Control and Visualisation function
▼ Datasheet
▼ Manual
► TVR Online Shop
|
|
|
| Features |
Description |
| LCD Languages |
English/Chinese, English/Dutch, English/Turkish, English/Spanish, English/French, English/Russian |
| Inputs |
5x Configurable digital, 3x Analogue senders, Magnetic Pickup |
| Outputs |
6x Configurable transistor, Mains and Generator Contactor Outputs |
| Current Measurement |
3 phases CT inputs |
| Voltage Measurement |
3 phase mains, 3 phase generator |
| Case |
| Dimensions |
158mm x 111mm x 67mm |
| Protection Class |
NEMA 4X IP65 at front side |
| Operating Range |
| DC Battery Supply range |
8 to 32Vdc, max.operating current is 370mA |
| Sender Measurement |
0 ... 1300 ohm, Accuracy: 1%FS, resolution: 1 ohm |
| Cabin.Temp.Measurement |
|
| Operating / Storage Temp. |
-20°C with +70°C / -40°C with +80°C |
| Expansions |
| Internal |
|
| GPRS |
|
| Embedded WEB server |
|
| Serial ModBus |
|
