|
|
TRANS-MiniAMF
Automatic mains failure units
The unit provides for automatic transfer of a load from mains to generator in the event of a mains failure. Intended for unattended operation, it is able to detect failure of any phase of the mains and to start and switch over to a generator if the mains voltage goes outside pre-set limits. Both automatic and manual control are possible. A test mode is also available which allows the generator to be run without taking the load.
 |
- CanBus J1939 ECU communication
- Remote Start/Stop, Speed and Idle mode control via J1939
- Power factor measurement for 1 phases
- Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc...
- Speed sensing from alternator voltage or magnetic pickup
- SPN, FMI and OC values reading from engines via J1939
▼ Datasheet
▼ Manual
|
|
| Features |
Description |
| LCD Languages |
English/Chinese, English/Dutch, English/Turkish, English/Spanish, English/French |
| Inputs |
3x Configurable digital, 3x Analogue senders, Magnetic Pickup, Charge Alternator D+(WL) input |
| Outputs |
6x Configurable Transistor, Mains and Generator Contactor Outputs |
| Current Measurement |
1 phases CT inputs for Load Current, 1x CT input for Earth Current |
| Voltage Measurement |
3 phases for Mains, 1 phases for Alternator |
| Case |
| Dimensions |
111mm x 81mm x 61mm |
| Protection Class |
NEMA 4X IP65 at front side |
| Operating Range |
| DC Battery Supply range |
8 to 32Vdc, max.operating current is 360mA |
| Sender Measurement |
0 ... 1300 ohm, Accuracy: 1%FS, resolution: 1 ohm |
| Cabin.Temp.Measurement |
|
| Operating / Storage Temp. |
-20°C with +70°C / -40°C with +80°C |
| Expansions |
| Internal |
Parameter configuration via RS-232 serial communication |
| GPRS |
|
| Embedded WEB server |
|
| Serial ModBus |
|
| Approvals |
CE, GOST-R |
|
