|
TRANS-MAINS
Automatic Transfer & Load Share Unit With Mains
TRANS-MAINS is a mains control, synchronising and automatic transfer unit. The unit is designed to synchronise the gensets (controlled by TRAN-SYNCRO units) with mains supplies. The unit controls the change over from mains supply to genset supply or runs gensets in parallel with the mains to provide no-break, peak lopping and peak shaving power solutions.
 |
- Load sharing with genset (up to 32 gensets)
- Busbar voltages and frequency measurements
- Bus failure detection
- Peak lopping (mains or genset)
- Power export to mains
- Mains decoupling protection with R.O.C.O.F & vector shift methods
- Logic Controller functionality for PLC
▼ Datasheet
▼ Manual
► TVR Online Shop
|
|
Features |
Description |
LCD Languages |
English, Turkish |
Inputs |
13 x Configurable digital |
Outputs |
Configurable 9 x Transistors, GBR outputs |
Current Measurement |
3 phase mains, 3 phase generator
3-300 Vac Phase-Neutral, 5-99.9 Hz. Accuracy: scale %1 Resolution: 1V, Harmonic: up to 11 harmonics |
Voltage Measurement |
3 phase mains, 3 phase busbar
3-300 Vac Phase-Neutral, 5-99.9 Hz. Accuracy: scale %1 Resolution: 1V, Harmonic: up to 11 harmonics |
Case |
Dimensions |
276 mm x 189 mm x 45 mm. |
Protection Class |
IP65 at front side |
Operating Range |
DC Battery Supply range |
8 to 32Vdc, max.operating current is 860mA |
Sender Measurement |
0 to 1300 ohm, accuracy: 1% FS, resolution: 1 ohm |
Cabin.Temp.Measurement |
|
Operating / Storage Temp. |
-20°C with +70°C / -40°C with +80°C |
Expansion Modules |
Internal |
USB programming and communication port, CanOpen multi communication, Ethernet, RS485 |
GPRS |
Optional |
Embedded WEB server |
Optional |
Serial ModBus |
|
Approvals |
CE, GOST-R |
|