|
|
TRANS-MidiAUTO
Automatic genset controller
The unit provides automatic start and stop the engine and protect the generator system. Both automatic and manual control are possible. A test mode is also available which allows the generator to be run for checking the generator system.
 |
- Log last 50 events & alarm information wiht measured values
- Statistics records
- Generator phase sequence control
- Power factor measurement for 3 phases
- Selectable Resistive sender types; Pt-100 VDO, US, GM, Ford, Datcon, etc...
- CanBus J1939 ECU communication
- SPN, FMI and OC values reading from engines via J1939
- Active, Reactive, Apparent power measurement
▼ Datasheet
▼ Manual
► TVR Online Shop
|
|
| Features |
Description |
| LCD Languages |
English/Chinese, English/Dutch, English/Turkish, English/Spanish, English/French, English/Russian, |
| Inputs |
5x Configurable digital, 3x Analogue resistive, Charge Alternator D + (WL) input |
| Outputs |
6x configurable transistor, Generator Contactor Output |
| Current Measurement |
3 Phase Current transformer input |
| Voltage Measurement |
3 Phase Generator voltage measurement |
| Case |
| Dimensions |
158 mm x 111 mm x 67 mm. |
| Protection Class |
NEMA 4X IP65 at front side |
| Operating Range |
| DC Battery Supply range |
8 to 32Vdc, max.operating current is 370mA |
| Sender Measurement |
0 ... 1300 ohm, Accuracy: 1%FS, resolution: 1 ohm |
| Cabin.Temp.Measurement |
|
| Operating / Storage Temp. |
-20°C with +70°C / -40°C with +80°C |
| Expansions |
| Internal |
|
| GPRS |
|
| Embedded WEB server |
|
| Serial ModBus |
|
| Approvals |
CE |
|
