|
|
TRANS-MiniAUTO++
Automatic genset controller
The unit provides automatic start and stop the engine and protect the generator system. Both automatic and manual control are possible. A test mode is also available which allows the generator to be run for checking the generator system.
 |
- Canbus J1939 ECU communication
- Log last 50 events & alarm information with measured values
- Statistics records
- Power factor measurement for 3 phases
- Selectable Resistive sender types; Pt-100, VDO, US, GM, Ford, Datcon, etc.
- SPN, FMI and OC values reading from engines via J1939
▼ Datasheet
▼ Manual
|
|
| Features |
Description |
| LCD Languages |
English/Chinese, English/Deutch, English/Turkish, English/Spanish, English/French |
| Inputs |
3x Configurable digital, 3x Analogue senders, Magnetic Pickup, Charge Alternator D+(WL) inputs |
| Outputs |
6x configurable transistor, Generator Contactor Output |
| Current Measurement |
3 phases CT inputs for Load Current |
| Voltage Measurement |
3 phases for Alternator |
| Case |
| Dimensions |
111mm x 81mm x 61mm |
| Protection Class |
NEMA 4X IP65 at front side |
| Operating Range |
| DC Battery Supply range |
8 to 32Vdc, max.operating current is 360mA |
| Sender Measurement |
0 to 1300 ohm, accuracy: 1%FS, resolution: 1 ohm |
| Cabin.Temp.Measurement |
|
| Operating / Storage Temp. |
-20°C with +70°C / -40°C with +80°C |
| Expansions |
| Internal |
Parameter configuration via RS-232 serial communication |
| GPRS |
|
| Embedded WEB server |
|
| Serial ModBus |
|
| Approvals |
CE, GOST-R |
|
