|
|
Leopard Panel Meters, Meter Bargraphs and Process Controllers
An economically programmable meter relay with isolated 4 to 20 mA retransmission for measurement and control applications in a 96x48mm , 96x24mm and our Bargraph in a 144x36mm case.
- 38 I-Series Plug-in Input Signal Conditioners (include AC / DC Current, AC / DC Voltage, Load Cell, Pressure, Process, Resistance, Temperature, 4 to 20 mA)
- Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999
- Auto-sensing AC/DC power supply (85-265 VAC / 95-300 V DC or optional 15-48 VAC / 10-72 V DC)
- 5, 10 or 24 V DC excitation (for external transmitters, pressure transducers, load cells and resistance bridge type sensors)
- Standard red or optional green or super bright red 4-digit LED (red or green 0.8” LED large display option) with display range –1999 to 9999
- Bragraphs come in a mono color or tricolor with 4 digit or bragraph only
- Four annunciator LEDs provide front panel alarm status indication for up to four set points
- Two 9 Amp Form C and two 4 Amp Form A relays, or optionally four 4 Amp Form A relays, available (DL models only)
- Three programming buttons and selectable ranges from the front panel
- Selection of relay activation above or below each set point
- Hysteresis, Delay on make and Delay on break, Peak and Valley
|
FL-B101Q |
FL-B202Q |
|
|
 |
Bargraph with 4 digit display, 4 software setpoints, options for relay, analogue outputs Option for red, green, or orange bar or a TRI colour bar. 144 x 36mm
|
Bargraph with 4 software setpoints, options for relay and analogue outputs. Option for red, green, or orange bar or a TRI colour bar. 144 x 36mm |
DUAL Bargraph 4 software setpoints with options for relay outputs and analogue outputs. Option for red or green bar.
144 x 36mm
|
| PL-B101D40 |
BL-40PSF |
BL-40 |
|
 |
 |
Bargraph with 4 digit display 4 software setpoints, options for relay and analogue outputs. Option for red, green, or orange bar or a TRI colour bar. 144 x 24 mm
|
Panel Meter with programmable scale factor and offset with isolated 4 to 20 mA output retransmission capability for measurement and control applications. Red or optional green or super bright 4 Digit LED in a 1/16 DIN Case. 96 x 24mm
|
Meter Controller, red or optional green or super bright 4 Digit LED in a 1/16 DIN. Case with relay and analogue output options. 96 x 24mm
|
|
